Table of Contents
Advertisement
How to stack a dryer onto the washing machine (ASKO):
There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard.
Installation and connection
1
The tipping guard consists of two metal
parts (A + B).
Use two screws to attach the A part to
the back of the dryer.
2
Undo the screw on the back side of the
washing machine.
3
Use the screw to attach the tipping
guard (B part) to the back of the
washing machine.
4
Level the washing machine so that it is
stable.
1. Level the washing machine in
longitudinal and traverse direction
by rotating the adjustable feet using
a No. 32 spanner. The feet allow
levelling by +/- 1 cm.
2. After adjusting the height of the
feet, firmly tighten the jam nuts
(counter nuts) using a spanner No
17, by turning them towards the
bottom of the washing machine
3. Tighten the jam nuts (counter nuts).
.
15
Advertisement
Table of Contents
