Electrical Connections - CAME ZLJ24 Original-Spare Parts

Electrical connections

TSP00 - Transponder sensor
M E
C A
L-N Power supply 230 V DC 50/60 Hz
M1-N1 24 V DC gearmotor (FROG A24/A24E - F1024 - F4024/E)
featuring delayed action on opening
M2-N2 24 V DC gearmotor (FROG A24/A24E - F1024 - F4024/E)
featuring delayed action on closing
2-FA1-FC1 Endstop (FROG A24 - F1024 - F4024) featuring delayed
action on opening
2-FA2-FC2 Endstop (FROG A24 - F1024 - F4024) featuring delayed
action on closing
M1-N1-E1 24 V DC gearmotor (AXO) featuring delayed action on opening
M2-N2-E2 24 V DC gearmotor (AXO) featuring delayed action on closing
M1-N1 24 V DC gearmotor (FROG A24E - F7024E) featuring delayed
action on opening
M2-N2 24 V DC gearmotor (FROG A24E - F7024E) featuring delayed
action on closing
+ E - Encoder A (FROG A24E - F7024E) featuring delayed action on opening
+ E - Encoder B (FROG A24E - F7024E) featuring delayed action on closing
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
LT001 - Magnetic card reader
Black
Red
10-11 Terminals for powering 24 V DC accessories
10-E Cycle lamp / Flashing light (socket rating: 24 V - 25 W max.)
10-5 Open gate indicator-light (socket rating: 24 V - 3 W max.)
11-ES Electrolock connection (12 V - 15W max)
2-CX..CY..CZ Re-open during closing (N.C.) socket, re-close during
opening, partial stop or stand-by Obstacle
1-2 Stop button (N.C. contact)
2-3 Opening button (N.O. contact)
2-4 Closing button (N.O. contact)
2-3P Partial opening button (N.O.)
2-7 Keyswitch and/or commands button (N.O.)
B1-B2 Possible output of the radio receiver's second channel (N.O.).
Socket rating: 1 A - 24 V DC.
Antenna connection
N.B.: insert the (R700)
coding board to have
the (TSP00) sensor or
(LT001) card reader
recognised.
R700
CANCELLI AUTOMATICI