Panasonic ES-RT87 Operating Instructions Manual page 16

►Replacementparts

Replacement parts are available at your dealer or Service Centre.
System outer foil and inner
blades
Replacement parts for
ES‑RT87 System outer foil
Inner blades
Special Detergent for Shaver Cleaning & Charging System WES4L03
Cleaningtheself-cleaningrecharger
Beard trimmings may become attached to the cleaning tray of the
self‑cleaning recharger. Follow the steps below to remove them. We
recommend doing this each time you change the cleaning liquid.
1. Be sure to remove the cleaning liquid unit
and the appliance plug from the self‑
cleaning recharger.
• Be careful not to spill the cleaning liquid.
• Some cleaning liquid components and
skin oil may separate and adhere to the
cleaning liquid unit and cleaning liquid
filter. This does not indicate a problem.
2. Pour water as illustrated while
tilting the cleaning liquid unit
and shaking it gently.
• You can clean with the
cleaning liquid filter removed.
• After washing, be sure to
attach the cleaning liquid filter.
16
3. Gently wipe off any beard trimmings attached
to the inside of the cleaning tray with a cloth
or tissue paper dampened with water.
• Clean the corners and uneven parts of the
WES9013
cleaning tray with a cotton swab
WES9087
dampened with water.
WES9068
► Whenthewaterdoesnotdrainfromthecleaningtray

• Do not tilt the self‑cleaning recharger to pour out water. Doing so
may cause the cleaning liquid in the cleaning liquid unit to spill or
cause the self‑cleaning recharger to malfunction.
Beard trimmings may clog the drain at the
bottom of the cleaning tray.
In this case, you cannot clean or dry the shaver.
Push the beard trimmings down through the
drain with a toothpick etc.