Download Print this page

Advertisement

Quick Links

TABLE OF CONTENTS

1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
5 Schematic Diagram ---------------------------------------------12
Model No.
Hong Kong
PAGE
© Panasonic Electric Works Co., Ltd. 2009.
All rights reserved. Unauthorized copying and distri-
bution is a violation of law.
Order Number SD0909H62CE
Rechargeable Shaver
ES-RT60
ES-RT40
ES-RT30
PAGE

Advertisement

loading

Summary of Contents for Panasonic ES-RT60

  • Page 1: Table Of Contents

    3 Troubleshooting Guide ----------------------------------------- 3 4 Disassembly and Assembly Instructions ---------------- 5 5 Schematic Diagram ---------------------------------------------12 6 Exploded View and Replacement Parts List -----------13 © Panasonic Electric Works Co., Ltd. 2009. All rights reserved. Unauthorized copying and distri- bution is a violation of law.
  • Page 2: Warning

    1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
  • Page 3: Troubleshooting Guide

    3 Troubleshooting Guide 3.1. Main unit and charging adaptor...
  • Page 4 3.2. Drying/Charging stand (ES-RT60 only) 3.3. Operation of Drying/charging stand (ES-RT60 only)
  • Page 5: Disassembly And Assembly Instructions

    4 Disassembly and Assembly Instructions 4.1. Disassembly Instructions Follow the procedure below to disassemble the main unit. 1. Remove the cap, the outer foil with foil frame and the inner blade. NOTE: If you do not replace the trimmer or trimmer handle, skip to No.4.
  • Page 6 4. Loosen a screw and remove the bottom cover. 5. To remove the side panels, insert a small slotted screw- driver into the housing and unhook. 6. Loosen four screws on both front and back side of hous- ing.
  • Page 7 7. Take out the housing B. 8. To remove the trimmer driving bar or the slit blade driving bar, press bars outward. 9. And take out the battery assembly from housing A.
  • Page 8 10. Remove the motor assembly and tube holder. 11. Remove the battery o-ring and washer in each battery. Take out the rechargeable batteries from the chassis.
  • Page 9 4.2. Cautions in Assembly NOTE: When reassembling, replace the new waterproof rubber. Make sure whether there is NO foreign substance sticking around a part covered with water seal. 4.2.1. Motor Insert the tube into the projection of the housing A and set the tube holder firmly.
  • Page 10 4.2.3. Rechargeable batteries Insert the rechargeable batteries into chassis. Attach the bat- tery o-ring and washer to the battery. Put the battery assembly from the battery terminal side into housing A, and insert the motor side into housing A. NOTE: While setting the battery assembly, pull the lead wires out in order to prevent pinching.
  • Page 11 4.2.5. Side panel Set the side panel on the body and insert the projection on top of side panel into the housing first. Then hook the front side and the rear side of the side panel in order. NOTE: Make sure that the left and right side panels are firmly fitted on both rear and front side.
  • Page 12: Schematic Diagram

    5 Schematic Diagram 5.1. ES-RT30 5.2. ES-RT40 5.3. ES-RT60...
  • Page 13 Model No. : ES-RT60 Exploded View...
  • Page 14 Model No. : ES-RT60 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks ES-RT60 WES8044X7156 PROTECTIVE CAP 1 [BG] WES9085E OUTER FOIL WESRT60S0047 OUTER FOIL FRAME 1 [BG] WES9064EP INNER BLADE WESRT60L1007 MOTOR ASSEMBLY 1 [BG] WES7047H3268...
  • Page 15: Exploded View And Replacement Parts List

    6 Exploded View and Replacement Parts List Model No. : ES-RT40 Exploded View...
  • Page 16 Model No. : ES-RT40 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks ES-RT40 WES8044X7156 PROTECTIVE CAP 1 [BG] WES9085E OUTER FOIL WESRT60S0047 OUTER FOIL FRAME 1 [BG] WES9064EP INNER BLADE WESRT60L1007 MOTOR ASSEMBLY 1 [BG] WES7047H3268 FOIL RELEASE BUTTON 2 (2PCS/PK), [BG] WES7046L1086...
  • Page 17 Model No. : ES-RT30 Exploded View...
  • Page 18 Model No. : ES-RT30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks ES-RT30 WES8044X7156 PROTECTIVE CAP 1 [BG] WES9085E OUTER FOIL WESRT60S0047 OUTER FOIL FRAME 1 [BG] WES9064EP INNER BLADE WESRT60L1007 MOTOR ASSEMBLY 1 [BG] WES7047H3268 FOIL RELEASE BUTTON 2 (2PCS/PK), [BG] WES7046L1086...

This manual is also suitable for:

Es-rt40Es-rt30