Sunfire Theater Grand Processor III User Manual page 9

13.3 In the MAIN Menu, select the
SETTINGS Menu, and then the
SPEAKERS Menu.
SETTINGS
MAIN ZONE
ZONE 2
SPEAKERS
VIDEO
SOFTWARE
CONTROL
SPEAKERS
SIZE
POSITION
CALIBRATION
CROSSOVER
SUBWFR MODE
13.4 In the SPEAKERS Menu, select
the SIZE Menu.
SPEAKER SIZE
MAIN LARGE
SIDE AXIS SMALL
SURROUND SMALL
CENTER SMALL
SURROUND BACK 2 SMALL
SUB ON
Use the joystick pad to set the size
of each speaker to Small or Large,
or set to OFF for those speakers
which are not present. Return to
the SPEAKERS Menu when you
are fi nished.
User's Manual
13.5 In the SPEAKERS Menu, select
the CALIBRATION Menu to adjust
the output of each speaker. A
test noise plays in each selected
speaker, and you use the remote
to adjust the volume of each
speaker until they are all playing
at the same level. Return to the
SPEAKERS Menu when you are
fi nished.
80 HZ
NORMAL LEFT MAIN
CENTER
RIGHT MAIN
RIGHT SIDE AXIS
RIGHT SURROUND
RIGHT SURR BACK
LEFT SURR BACK
LEFT SURROUND
LEFT SIDE AXIS
SUBWOOFER
GO TO LEFT MAIN
13.6 In the SPEAKERS Menu, select
the SPEAKER POSITION Menu.
MAIN/SIDE AXIS
CENTER
SURROUND
SURROUND BACK
Enter how far each speaker is
from your listening position. You
can measure it with a tape, or do a
visual estimation.
13.7 Press the remote's EXIT button
to quit the On Screen Display. Now
the TGIII is setup correctly and
ready for action.
SPEAKER CALIBRATION
0dB
0dB
2dB
0dB
0dB
0dB
SPEAKER CALIBRATION
0dB
2dB
0dB
0dB
ON-THE-FLY TRIMS ZEROED
SPEAKER POSITION
10 FT
11 FT
5 FT
4 FT
CHAPTER 1
14. If you play a Dolby Digital or DTS
encoded source, the TGIII will
automatically select the correct
surround mode. If it is a 2-channel
source, you can select a surround
mode using the remote's MODE
buttons or from the front panel.
15. You might want to turn on the
front panel "Fully Automatic" button
near the Volume control. This will
let the TGIII select an input source
automatically, whenever the source
starts to play.
16. The TGIII has many more op-
tions which are described in further
detail in the OSD menu section on
page 30. These options will help
you customize the TGIII to suit
your tastes. You can do this after
you have used the TGIII for a while
and have a better idea of how
you would like to customize your
system.
17. Enjoy your new Theater Grand
Processor III. It will allow you to
listen to many great and wonderful
performances, from Big Band 78s
in surround sound, to the latest
space-action blockbuster with up
to nine speakers and a subwoofer
fully engaged.
Further Information
For more details, see the following
pages of the manual:
Remote Control:
On Screen Display:
Speaker Size:
Speaker Position:
Speaker Calibration: Page 40
Bass Management:
Surround Modes:
Page 25
Page 30
Page 38
Page 39
Page 42
Page 43
9