Sunfire Theater Grand Processor III User Manual page 16

CHAPTER 2
Digital audio and component video connections
Component video signals
From: DVD Player component
video outputs
To: TGIII DVD component
video inputs
16
Digital audio signals
From: DVD Player coaxial
digital audio outputs
To: TGIII DVD coaxial
digital audio inputs
Component video signals
from TGIII Component video outputs
to TV Monitor's Component video inputs
If your DVD and TV Monitor both
have com po nent-video, they can be
connected as shown, giving a supe-
rior picture. Note that the OSD is not
available with component video.
The digital output from the DVD
player must be con nect ed to the digi-
tal inputs of the TGIII. This is the only
way the TGIII can receive and decode
Dolby Digital or DTS signals. It is best
to use a coaxial digital cable to make
the connection to the TGIII, rather
than a standard audio cable.
Note: you must also connect the
player's two-channel audio outputs if
you want it to play it in Zone 2 when
the Main Zone is playing a different
source.
User's Manual