Sunfire Theater Grand Processor III User Manual page 39

Speaker Position Menu
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS
Speaker Position
This menu allows you to enter the
distance from your listening position
to the various speakers. The TGIII will
then automatically adjust and correct
the speaker delay times. The sound
from each speaker should arrive at
the listener at the correct time. The
distance measurement is not criti-
cal, and a visual estimate is usually
adequate.
The procedure is as follows:
1. Measure or visually estimate
(in feet) how far each speaker
is away from the center listen-
ing position of your home
theater.
2. In the OSD menu, use the
remote control joystick arrow
buttons to enter the distance in
feet for each speaker.
3. The TGIII automatically sets
the appropriate delays for each
speaker so the sounds arrive
at the listening position at the
correct time.
4. Use this table to record your
speaker distance measure-
ments.
User's Manual
SETTINGS
MAIN ZONE
ZONE 2
SPEAKERS
VIDEO
SOFTWARE
CONTROL
SPEAKER
MAIN
CENTER
SURROUND
SURROUND BACK
SPEAKERS
SIZE
POSITION
CALIBRATION
CROSSOVER 110 HZ
SUBWFR MODE
DISTANCE
CHAPTER 4
SPEAKER POSITION
MAIN/SIDE AXIS 10 FT
CENTER 11 FT
SURROUND 5 FT
SURROUND BACK 4 FT
39