Sunfire Theater Grand Processor III User Manual page 34

CHAPTER 4
Input Menus
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS
DVD
CD
SAT
VID1
VID2
VCR
TUNER
TUNER PRESETS
TAPE
PHONO
8-CHANNEL
34
Input Menus
These menus let you select which
input you would like to confi gure.
Pressing the joystick right on each
input brings up a second menu which
allows you to confi gure what happens
when each input is selected.
INPUTS
DVD INPUT CONFIGURE
NAME
GAIN TRIM
DEFAULT MODE
MAIN ZONE
FULL AUTO
TRIGGER RELAY
ZONE 2
INPUTS P2
8-CH INPUT CONFIGURE
NAME
GAIN TRIM
LOCK TO VID
MAIN ZONE
TRIGGER RELAY
Note: the 8-Channel input menu is
slightly different from the other menus:
It allows you to select a
specifi c video input whenever
the 8-Channel audio input is
selected. Also, this input only
works in the Main Zone, not
Zone 2.
Input Confi guration Menus
The example shows the DVD menu.
Name
Gain Trim
DVD
0 dB
LAST
ENABLE
ON
Default Mode
ON
ENABLE
Main Zone
Full Auto
8-CHANNEL
0 dB
VID1
ENABLE
ON
Trigger Relay
Zone 2
Use the joystick up/down, and
left/right to change the display
name for any input, up to 9
characters. Move fully to the left
after entering the name.
Use this to adjust all of your
sources to play at similar levels.
To prevent overloading, the
levels can only be adjusted
downwards. You should try
and trim all the inputs to be the
same average level as your
quietest source.
Set the input to a favorite sur-
round mode or stereo.
Enable/disable the selected
input in the Main Zone. You can
set up your system so any un-
used inputs are not selectable.
From the factory, the inputs
are enabled. If you choose to
disable an input, then it will not
play in the Main Zone.
This turns on/off the fully auto-
matic mode for this input. When
this is on, the TGIII will turn on
and select this input whenever
this input starts to play. You
can deselect any input which
hinders full-auto operation.
The Trigger Relay can be set to
turn on whenever the input is
selected. This could be used to
turn on an amplifi er or a video
screen for example.
Enable/disable the input in
Zone 2. You can select the
inputs you wish to play in Zone
2. For example, you might dis-
able the Phono input if nobody
in Zone 2 appreciates your
vintage collection of 78s.
User's Manual