(Audio Set) Menu; Settings For The Audio Recording (Dv Au. Mode/Xlr Set, Etc - Sony HVR-V1U Operating Manual

Press the MENU button t select the
(CAMERA SET) by turning the SEL/
PUSH EXEC dial.
FADER
You can record a transition with the
following effects adding to the interval
between scenes.
1 Select the desired effect in [STBY] (during
fading in) or [REC] (during fading out)
mode.
2 Press the REC START/STOP button.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel before starting the operation,
select [OFF] in step 1.
Once you press the REC START/STOP
button, the setting is canceled.
STBY
Fading out
WHITE FADER
BLACK FADER
b Note
• This is automatically set to [OFF] if you turn the
power off and back on.
68
REC
Fading in

(AUDIO SET) menu

Settings for the audio recording (DV AU.
MODE/XLR SET, etc.)
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 57 for details on selecting
menu items.
Press the MENU button t select the
(AUDIO SET) by turning the SEL/
PUSH EXEC dial.
DV AU. MODE
(DV Audio mode)
B FS32K ( )
Records in the 12-bit mode (2 stereo
sounds).
FS48K ( )
Records in the 16-bit mode (1 stereo sound
with high quality).
b Note
• When recording in the HDV format, sound is
automatically recorded in the [FS48K] mode.
MIC NR
Since the default setting is [ON], noise
input through the microphone is reduced.
XLR SET
AU. MAN GAIN
x
You can select whether the audio levels of
channel 1 is linked with or separated from
that of channel 2 when using an external
microphone.
B SEPARATE
Select to record the sound in channel 1
separately from that in channel 2 (to use
channel 1 and channel 2 as separate sound
source).
LINKED
Select to record the sound in channel 1 and
that in channel 2 (as a set, like stereo
sound).
appears on the status check screen.