Sony HVR-V1U Operating Manual page 64

Operating guide
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

Press the MENU button t select the
dial.
x
TYPE
You can select the color bar type.
x
TONE
When you set [ON/OFF] to [ON] and
[TONE] to [ON], audio tone signals (1kHz:
full bit -20dB) are output (the default
setting is [OFF]).
AF ASSIST
When you set [AF ASSIST] to [ON], you
can briefly focus manually by turning the
focus ring during the auto focus. (the
default setting is [OFF]).
64
TYPE 1
TYPE 2
TYPE 3
(CAMERA SET) by turning the SEL/PUSH EXEC
FOCUS MACRO
Since the default setting is [ON], you can
focus on a subject within 80 cm (about 2 5/
8 feet). When [FOCUS MACRO] is set to
[OFF] (
within 80 cm (about 2 5/8 feet) but you can
easily find the focal point of a subject at 80
cm (about 2 5/8 feet) or further regardless
of the zoom position.
AE SHIFT
You can adjust the exposure between -7
(dark) and +7 (bright) using the SEL/PUSH
EXEC dial.
when [AE SHIFT] is set to anything other
than the default setting.
b Notes
• If you adjust all of the iris, gain, shutter speed
manually, you cannot obtain the effect of [AE
SHIFT].
• This function is not effective when [HYPER
GAIN] is set.
AE RESPONSE
You can select the speed to adjust the
exposure automatically, in accordance with
the brightness of the subject. [FAST],
[MIDDLE], and [SLOW] are available (the
default setting is [FAST]).
AGC LIMIT
You can select the upper limit for the Auto
Gain Control (AGC) from [OFF] (18dB, the
default setting), [12dB], [6dB] or [0dB].
b Note
• If you adjust the gain manually, you cannot
obtain the effect of [AGC LIMIT].
AT IRIS LMT
You can select the highest iris value for the
automatic adjustment from [F11] (the
default settings), [F5.6], [F4].
), you cannot focus on a subject
and the setting value appear

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1pHvr-v1n

Table of Contents