Step 1 Preparing The Power Supply; Installing The Battery Pack - Sony digital handycam DCR-TRV10 Operating Instructions Manual

Step 1 Preparing the power supply

Installing the battery pack

Install the battery pack to use your camcorder outdoors.
(1) Lift up the viewfinder.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
Lift up the viewfinder.
Slide the battery pack out in the direction of the arrow while pressing BATT down.
After installing the battery pack
Do not carry your camcorder by holding the battery pack. If you do so, the battery pack
may slide off your camcorder unintentionally, damaging your camcorder.
If you use the large capacity battery pack
If you install the NP-FM70/FM90 battery pack on your camcorder, extend its
viewfinder. Take care not to pinch your finger when lifting the viewfinder up and
down.
9