Labeling A Cassette - Sony digital handycam DCR-TRV10 Operating Instructions Manual

Labeling a cassette

(1) Insert the cassette you want to label.
(2) Set the POWER switch to VTR.
(3) Press MENU to make the menu display appear.
(4) Turn the SEL/PUSH EXEC dial to select
(5) Turn the SEL/PUSH EXEC dial to select TAPE TITLE, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(8) Repeat steps 6 and 7 until you finish the label.
(9) Turn the SEL/PUSH EXEC dial to select [SET], then press the dial.
The label is stored in memory.
4,5
70
If you use a tape with cassette memory, you can label a cassette. The label can
consist of up to 10 characters and is stored in cassette memory. When you insert
the labeled cassette and turn the power on, the label is displayed on the LCD
screen, in the viewfinder, or on the TV screen.
CM SET
CM SEARCH
T I TLEERASE
T I TLE DSPL
TAPE T I TLE
ERASE ALL
[ MENU ] : END
, then press the dial.
6-8
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END