Resetting The Date And Time - Sony digital handycam DCR-TRV10 Operating Instructions Manual

Resetting the date and time

The clock is set to East Coast Standard Time at the factory.
If you do not use your camcorder for about a half year, the date and time settings may
be released (bars may appear) because the vanadium-lithium battery installed in your
camcorder will have been discharged.
First, set the year, then the month, the day, the hour and then the minute.
(1) While your camcorder is in the standby mode, press MENU to display the
(2) Turn the SEL/PUSH EXEC dial to select
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
(7) Press MENU to make the MENU settings disappear.
4
2000 JAN 1
12 00 AM
The year changes as follows:
If you do not set the date and time
"– –:– –:– –" is recorded on the tape and the Memory Stick (DCR-TRV10 only).
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
•12:00 AM stands for midnight.
•12:00 PM stands for noon.
78
MENU settings.
pressing the dial.
the time signal. The clock starts to move.
1, 2
MENU
7
2000 JAN 1
12 00 AM
1999 ˜ 2000 N · · · · n 2029
MANUAL SET
S E T U P M E N U
CLOCK SET CLOCK SET
AUTO TV ON AUTO TV ON
TV I NPUT TV I NPUT
LTR S I ZE LTR S I ZE
DEMO MODE DEMO MODE
RETURN
[MENU] : END
6
S E T U P M E N U
CLOCK SET
AUTO TV ON
TV I NPUT 2000
LTR S I ZE
DEMO MODE
RETURN
[MENU] : END
, then press the dial.
3
JAN 1 1999
12:00:00AM
S E T U P M E N U
CLOCK SET
AUTO TV ON
JUL 4
TV I NPUT
LTR S I ZE
DEMO MODE
RETURN
5 30 PM
[MENU] : END
S E T U P M E N U
CLOCK SET
AUTO TV ON
JAN 1
TV I NPUT 1999
LTR S I ZE
DEMO MODE
RETURN
12 00 AM
[MENU] : END
JUL 4 2000
5:30:00PM