Water Drainage - AEG L 60460 FL User Manual

Aeg washer user manual
Hide thumbs Also See for L 60460 FL:
Table of Contents

Advertisement

Water-stop device

WATER DRAINAGE

There are different procedures to con-
nect the drain hose:
With the plastic hose guide.
A
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace
the hose.
• On the edge of a sink.
• Make sure that the plastic guide can-
not move when the appliance drains.
Attach the guide to the water tap or
the wall.
• To a stand pipe with vent-hole.
Refer to the illustration. Directly into
a drain pipe at a height of not less
than 60 cm and not more than 100
cm. The end of the drain hose must
always be ventilated , i.e. the inner
diameter of the drainpipe must be
larger than the external diameter of
the drain hose.
ENGLISH
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L 60468 flL 60660 flL 60260 fl

Table of Contents