AEG L6FBC40480 User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L6FBC40480
  6. User manual

AEG L6FBC40480 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L6FBC40480
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L6FBC40480

Summary of Contents for AEG L6FBC40480

  • Page 1 L6FBC40480 User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    18. ENVIRONMENTAL CONCERNS..............36 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    This appliance is intended to be used in household • and similar applications such as: staff kitchen areas in shops, offices and other – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments;...
  • Page 5 ENGLISH future they must be reattached to lock be replaced, this must be carried out the drum to prevent an internal by our Authorised Service Centre. damage. • Connect the mains plug to the mains • Always take care when moving the socket only at the end of the appliance as it is heavy.

  • Page 6: Installation

    • Do not wash fabrics which are heavily hinge and seals, other seals, door soiled with oil, grease or other greasy locking assembly, plastic peripherals substances. It can damage rubber such as detergent dispensers. Please parts of the washing machine.
  • Page 7 ENGLISH 2. Put the packaging element on the floor behind the appliance and carefully put it down onto its rear side. Remove the polystyrene protection from the bottom. We recommend that you keep the packaging and the transit bolts for any transport of the appliance.
  • Page 8 2. On the edge of a sink - Fasten the guide to the water tap or to the wall. 45º 45º 20º 20º Make sure that the plastic 2. Position it toward left or right guide cannot move when the...

  • Page 9: Product Description

    ENGLISH The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm - min. 1.5") must be larger than the external diameter of the drain hose. 5. Without the plastic hose guide, to a 3.3 Electrical connection sink spigot- Put the drain hose in the spigot and tighten it with a clamp.

  • Page 10: Accessories

    5. ACCESSORIES 5.1 Available in Only appropriate www.aeg.com/shop or from accessories approved by authorised dealer AEG ensure the safety standards of the appliance. If Read carefully the instructions supplied unapproved parts are used, with the accessory. any claims will be...

  • Page 11: Technical Data

    If you install the appliance on a plinth under the washing machine. that is not an accessory supplied by Verify the compatible AEG, secure the appliance in the fixing stacking kit by checking the plates. depth of your appliances. Read carefully the instructions supplied with the accessory.

  • Page 12: Control Panel

    7. CONTROL PANEL 7.1 Control panel description Ein /Aus touch button Schleudern reduction touch button • Spülstopp option Programme dial • Nachtprogramm option Display Option touch button Zeitvorwahl touch button • Energiesparen option Zeit Sparen touch button • Leichtbügeln option Start/Pause touch button •...

  • Page 13: Dial And Buttons

    ENGLISH The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). • Warning code ( Extra rinse indicator. It lights on when this option is se‐ lected . indicator blink during the laundry load detec‐ tions.
  • Page 14 8.6 Flecken/Vorwäsche All spinning phases are suppressed and Leichtbügeln is automatically Press this button repeatedly to activate deselected if previously set. The one of the available options. programme ends with water in the drum. The Spülstopp indicator flashes • Flecken...

  • Page 15: Programmes

    ENGLISH 8.9 Start/Pause appliance. Two different tunes sound while switching the appliance on or off. Touch the Start/Pause button to start, As the Stand-by function automatically pause the appliance or interrupt a deactivates the appliance to decrease running programme. the energy consumption in a few cases, you may need to activate the appliance 8.10 Ein /Aus again.
  • Page 16 Programme Programme description Mix 1h 40° Cotton and synthetic fast-coloured items. Complete wash‐ ing programme that, in only 1h, washes intensively the daily soiled laundry and ensures a good washing performance in a short time. 1) This programme is for daily use and has the lowest energy and water consumption whilst maintaining a good washing performance.
  • Page 17 ENGLISH Programme Default tempera‐ Reference spin Maximum load ture speed Spin speed range 1400 rpm Mix 1h 40° 40 °C 3 kg 1400rpm - 800 rpm 1) According to Commission Regulation EU 2019/2023, this programme at 40 °C is able to clean normal‐ ly soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle.

  • Page 18: Settings

    Programme Mix 1h 40° ■ ■ ■ ■ ■ ■ ■ 1) This option is not available with temperature lower than 40 °C. 2) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully load the appliance, however the washing results can be less satisfactory.

  • Page 19: Before First Use

    ENGLISH You can activate this option: If you deactivate the • After you touch the Start/Pause acoustic signals, they button: all the buttons and the continue operate when the programme dial are deactivated appliance has a malfunction. (except Ein /Aus button ). •...
  • Page 20 12.4 Check the position of the CAUTION! flap Washing heavily oiled, greasy stains could cause 1. Pull out the detergent dispenser until damage rubber parts of the it stops. washing machine. 2. Press the lever down to remove the dispenser.
  • Page 21 ENGLISH 12.6 Starting a programme With the flap in the position DOWN: Touch the Start/Pause button to start the • Do not use gelatinous programme. or thick liquid The related indicator stops flashing and detergents. stays on. • Do not put more The programme starts, the door is liquid detergent than locked.
  • Page 22 12.8 The ProSense load 12.9 Interrupting a detection programme and changing the options The programme duration in the display is referred to a When the programme is running, you medium/high load. can change only some options: 1. Touch the button Start/Pause.
  • Page 23 ENGLISH While a programme or the delay start When you activate the operates, the appliance door is locked. appliance again, the display show the end of the last set If the temperature and level programme. Turn the of the water in the drum are programme knob to set a too high and/or the drum still new cycle.

  • Page 24: Hints And Tips

    Press the button Ein /Aus to activate If you set a programme or an the appliance again. option that ends with water • After 5 minutes from the end of the in the drum, the Stand-by washing programme function doesn't deactivate...

  • Page 25: Care And Cleaning

    ENGLISH 13.4 Ecological hints • Use only detergents and other treatments specially made for To save water, energy and to help washing machines. First, follow these protect the environment, we recommend generic rules: that you follow these tips: – powder detergents for all types of fabric, excluding delicate.
  • Page 26 CAUTION! the appliance: this will prevent mildew Do not use alcohol, solvents and odours. or chemical products. If the appliance is not used for a long time: close the water tap and unplug the CAUTION! appliance.
  • Page 27 ENGLISH Clean it when needed, using ammonia cream cleanser agent without scratching 2. Remove the top part of the additive the seal surface. compartment to aid cleaning and Always obey the instructions flush it out under running warm that you find on the water, to remove any traces of packaging of the product.
  • Page 28 2. Place a suitable bowl below the drain 14.9 Cleaning the drain pump pump access to collect the water that flows out. WARNING! 3. Open the chute downwards. Always Disconnect the mains plug keep a rag nearby to dry up any from the mains socket.
  • Page 29 ENGLISH 8. If it is necessary, remove fluff and 12. Close the pump cover. objects from the filter recess. 9. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 14.10 Cleaning the inlet hose and the valve filter It is recommended to clean both the...

  • Page 30: Troubleshooting

    14.11 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0°...
  • Page 31 ENGLISH 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: Problem Possible solution...
  • Page 32 If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...

  • Page 33: Consumption Values

    ENGLISH Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature. •...
  • Page 34 Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.

  • Page 35: Quick Guide

    ENGLISH Programme Litres h:mm °C Feinwäsche 0.40 1:15 1200 30°C Wolle/Seide 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons. 4) It also performs as quick washing cycle for lightly soiled laundry. 17.

  • Page 36: Environmental Concerns

    Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description White and coloured cottons. Normally soiled Eco 40-60 8 kg garments. Baumwolle 20° 8 kg Mixed fabrics. Cotton and synthetic items.
  • Page 40 www.aeg.com/shop...

Table of Contents