Nfc Module - HP Elite x360 1040 G9 Maintenance And Service Manual

3. Detach the NFC module cable (3) from the top cover/keyboard. (The NFC module cable is attached to the top
cover/keyboard with double-sided adhesive.)
4. Remove the NFC module cable.
Reverse this procedure to install the NFC module cable.

NFC module

To remove the NFC module, use this procedure and illustration.
Table 5-15 NFC module description and part number
Description
NFC module
NOTE: The NFC module spare part kit does not include the NFC module cable. The NFC module cable is
included in the Cable Kit, spare part number N09289-001.
NFC module antenna cable
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the NFC module cable (see
Remove the NFC module:
1. Release the ZIF connector (1) to which the NFC module antenna cable is connected, and then disconnect the
NFC module antenna cable from the NFC module.
66 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 43).
NFC module cable on page
41).
65).
Spare part number
M08706-001
N13697-001
41).