Sherwood Newcastle R-956 Operation Instructions Manual page 24

Presetting radio stations
You can store up to 30 preferred stations in the
memory.
Tune in the desired station with auto or
manual tuning.
1
Select the desired preset number (1~30)
and press the MEMORY/ENTER button.
3
MULTI CONTROL
DOWN UP
When using the NUMERIC buttons on the remote
control.
Examples)
For "3" :
3
within 2 seconds
For "15" :
1 5
The station has now been stored in the memory.
When using the NUMERIC buttons, the station is
stored automatically without pressing the MEMORY/
ENTER button.
A stored frequency is erased from the memory by
storing another frequency in its place.
If "MEMORY" goes off, start again from step 2,
above.
Tuning to preset stations
After selecting the tuner as input source,
select the preset tuning mode.
1
TUNING/PRESET
MODE
Then "PRESET" lights up.
2
"MEMORY" flickers for 5 seconds.
4
MEMO/ENTER
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned
off, are memorized.
INPUT SELECTOR settings
Surround mode settings
Preset stations, etc.
Note : If the electricity fails or the AC input cord is
disconnected for about 2 weeks. All memorized
functions will be lost. Please enter them into
memory again.
2
When using the NUMERIC buttons on the remote
control.
Examples)
For "3":
For "15":
When selecting the desired preset number with the
NUMERIC buttons, the desired preset station will be
tuned to automatically without first selecting the preset
tuning mode.
2 4
Press the MEMORY/ENTER button.
MEMO/ENTER
Repeat the above steps 1 to 3 to memorize
other stations.
Select the desired preset number.
MULTI CONTROL
DOWN UP
3
within 2 seconds
1 5