Listening To Radio Broadcasts - Sherwood Newcastle R-956 Operation Instructions Manual

LISTENING
For some countries in the southeast asia, etc., AM frequency step of 10 kHz may be changed to 9 kHz according to the countries.
To change to 9 kHz, do the following procedure.
1. Press the STANDBY button on the front panel while receiving AM broadcasts.
2. Press the STANDBY button while keeping the BAND button on the front panel pressed.
To change to 10 kHz, do this procedure again.
Auto tuning
Select the tuner.
1
AUDIO
or
Select the tuning mode.
3
TUNING/PRESET
MODE
Each time this button is pressed, the mode changes
as follows;
Tuning mode : "PRESET" goes off.
Preset mode : "PRESET" lights up.
Find the desired station.
5
MULTI CONTROL
DOWN
Manual tuning
Manual tuning is useful when you already know
the frequency of the desired station.
Perform the steps 1~3 in "Auto tuning"
procedure and select the manual tuning
1
mode as desired.
AUTO/MANUAL
Then "AUTO" goes off.
TO RADIO
PWR
AUD AUD CD DVD AUX
SAT SAT TV VCR CBL
1 2 3
4 5 6
7 8 9
0
MUTE CH SEL
P.SCAN
SLEEP
VOL VOL CH LEVL
T.TONE
D.TIME D.ADJ
ENTER
OSD
AUTO STEREO
TUNER
DSP MODE 6.1CH IN
PHONO CD TUNER TAPE MON
T2 MON VID SEL VID 2 VID 3
VID 4 VID 4 AUX ROOM 2 SYS DISP
HOME THEATER MASTER
RNC-30
UP
2 3
Select the desired band.
2
BAND
BAND FREQUENCY
Each time this button is pressed, the band is changed
to FM or AM.
When pressing the BAND button without first
selecting TUNER, the tuner will be selected
automatically.
Select the auto tuning mode as desired.
4
AUTO/MANUAL
Each time this button is pressed, the mode changes
as follows;
Auto tuning mode : "AUTO" lights up.
Manual tuning mode : "AUTO" goes off.
The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and "TUNED".
If the station found is not the desired one, simply
repeat this operation.
Weak stations are skipped during auto tuning.
Rotate the MULTI CONTROL knob
repeatedly until the right frequency has
2
been reached.
MULTI CONTROL
DOWN UP