Connecting; Data Transfer; Disconnecting - Netac iMuz C700 User Manual

6) System would automatically detect the driver. Please click "Next" in the following steps and click "Finish"
in the last step to finish the installation.

2.2.2 Connecting

1) Press PLAY/PAUSE button to power on iMuz, then connect it and the computer with a USB cable.
2) "USB attached" would appear to prompt status after iMuz connected
with computer successfully.
3) Double click "My Computer", you would find a new icon named "Removable Disk", representing iMuz. A new
icon would display at the taskbar on Windows Me/2000/XP/Server 2003, representing iMuz.

2.2.3 Data Transfer

1) Now you can copy the files what you need to iMuz like using traditional floppy disk or hard disk, and edit the
files in iMuz.
2) Please do not disconnect iMuz with computer during data transferring between iMuz and computer, otherwise
the data would lose.

2.2.4 Disconnecting

1) To disconnect iMuz from computer, please refer to the following methods according to your Operating
System:
Windows 98: you can disconnect iMuz from computer when the data transferring finished.
Windows Me/2000/XP/Server 2003: Click the icon at the taskbar with the left-key of mouse after the data
transferring finished, then disconnect iMuz from computer according to prompt.