Special Functions; Caller Id (Requires Subscription To Service) - Sharp UX-P115 Operation Manual

5. Special Functions

Caller ID (Requires Subscription to Service)

If you subscribe to a caller identification service from your telephone
company, you can set your fax machine to display the name and number of
the caller while the fax rings.
Important:
♦
To use this function, you must subscribe to a caller identification service
from your telephone company. Note that the machine may not be
compatible with some caller identification services.
♦
Area Code mode: This step is needed if your telephone exchange cannot
dial a local phone number (within your calling area code) when the area
code is dialed with the phone number (see Step 5).
1
FUNCTION
Press once and
2
Press once and
3
Press once.
4
Press (YES) to turn on Caller ID.
1
(To turn off Caller ID, press
to Step 8.)
5
Press to select SET.
1
(To clear a previously set area code,
press and go to Step 8.)
2
Note: Entering your area code in this step causes it to be automatically removed
from local numbers in the Caller ID list (page 51). This is only required if you need
to eliminate dialing of the area code when dialing a local number from the list.
Example (using the area code "123"): If Step 5 is skipped, the Caller ID display will
show 123-444-1234, and the number that will dial from the Caller ID list is 123-
444-1234. If the area code 123 is entered in Step 5, the Caller ID display will show
444-1234, and the number that will dial from the Caller ID list is 444-1234.
once.
5 times.
and go
2
Display:
OPTION SETTING
CALLER-ID
1=YES, 2=NO
AREA CODE # MODE
1=SET, 2=CLEAR
ENTER AREA CODE
49