Sekonic L-758C Operating Manual page 53

11) Setting Clipping point (+)
Rotate the Jog wheel ⑤ while pressing ISO2 but-
ton ⑥ . Clipping point can be set from 0 to +7EV
in 1/10 step increments.
12) Press the Measuring button ⑭ if you want to copy
this ISO setting to all ISO setting (from ISO 3 to
8000)
Reference:
• To return to a previous setting, press the ISO1 button ⑪ and the Memory clear button @ 3
simultaneously.
• To return to the default for all Camera setting, press the Mode button ⑩ and the Memory
clear button @3 simultaneously.
• To return to the default for one of the cameras, please use the application software instead
of manual input.
<Note> If we update firmware, we don't need to mention this explanation here.
7. Camera Exposure Profiling
-47-