Set Wireless Security; Particle Counter Navigation - Hach MET ONE 3400 User Manual

• Select the channel (Ad Hoc mode only).
• Check Enable Radio if needed.
• Select the country.

Set wireless security

1. On the Counter Navigation screen, push NETWORK.
2. Select the Wi-Fi Security tab.
3. Configure these options:
• Select the security type.
• Select the encryption type.
• Select the authentication type.
• Select the key type: Hex or Passphrase.
• Enter the key in the Key field and in the Retype Key field.

Particle counter navigation

The functions of the particle counter are accessed from the Counter Navigation screen.
shows the functions that are accessible through the navigation screen.
Icon Function
Sample
Historical
Export
Printer
Locations
Group
System
Sizes
18 English
Table 2 Screen icon descriptions
Description
Measure particle counts. Refer to
Review measurement results in the buffer; print, export or filter data. Refer to
historical buffer data on page 37.
Output file as comma separated value (CSV), tab separated, or PortAll files. Refer to
Export data on page 37.
Print sample data as hard-copy. Refer to
Add/edit/remove areas; copy location settings, edit locations settings; edit alarms for
specific locations. Refer to
Load/add/edit a group; delete a group. Refer to
Time/Date; Sleep time/backlight timeout; set logon requirements; set sounds for alarms;
manage users; set the units for flow rates; manage the data buffer. Refer to the CD for
more information. Refer to
Add/edit/delete a size (optional). Refer to
Measure particle counts
How to use the Print Center
Location management on page 25.
Group management
Configure the system on page 20.
Sizes function
Table 2
on page 32.
Review
on page 35.
on page 27.
on page 28.