安装滚筒皮带 - AGFA DRY 3.4 Manual

138 | DRY 3.4 | 即插即用安装手册
8
安装滚筒皮带
1
1. 从附件箱中取出滚筒皮带。
8
1
2
2. 打开滚筒室门。
3
2
3
3. 向下推动滚筒皮带张紧轮并握住。
4
5
4
4. 安装滚筒平皮带，使内层文字面朝上。轻轻释放皮带张紧轮。
5
2903S EN 20121207 2903S EN 20121207
2602A ZH-CN 20191018 0826
Mount Drum belt
Take drum belt from accessories box.
Mount Drum belt
Take drum belt from accessories box.
Open drum compartment door.
Push drum belt tensioner down and
hold it.
Open drum compartment door.
Push drum belt tensioner down and
hold it.
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
Close drum compartment door.
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
Close drum compartment door.
If the printer is not used for a long time
(at least 4 weeks),
it is recommended to remove the belt.
B
B
0
0
2
Open drum compartment door.
2
Open drum compartment door.
4
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
4
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
If the printer is not used for a long time
(at least 4 weeks),
it is recommended to remove the belt.
If the printer is not used for a long time
(at least 4 weeks),
it is recommended to remove the belt.
0
0
11/