Sanyo KHS0951 Instruction Manual page 25

Air cleaning filter
(not provided)
NOTE
WARNING
How to install the air
cleaning filter
NOTE
Cleaning the main unit and
remote control unit
OI-351-25EG
Care and Cleaning (continued)
The air cleaning filter removes dust and dirt from the air, and reduces odors
and smoke from tobacco.
KHS0951/KHS1251
The air cleaning filter is not provided with the air conditioner and must be
purchased separately. The first time that you buy the air clean filter, it is necessary
to get the STK-ARF4B model with frame. When changing the filter subsequently,
it is only necessary to replace the filter itself (model STK-F4B). Do not throw
away the filter frame.
KHS1852
The air clean filter is not provided with the air conditioner and must be purchased
separately.
Ask for the STK-F4B model when purchasing.
The air cleaning filter cannot remove harmful gases or vapors nor ventilate air
in the room. You must open doors or windows frequently when you use gas or
oil heating appliances. Otherwise there is a risk of suffocation in extreme cases.
The air cleaning filter needs to be
installed behind the anti-mold filter.
1. Remove the anti-mold filter.
2. To mount the STK-F4B, set the
air clean filter (sold separately)
at the mounting position with
the black side facing the rear.
To mount the STK-ARF4B,
mount the air clean filter in the
position shown in the diagram
with the (STK-F4B) FRONT
marking facing the front.
3. Reinstall the anti-mold filter,
and close the suction grill.
In general, the filter should be
•
replaced once every three
months.
Dirty air clean filters cannot be
•
washed and reused. Purchase a
replacement filter at your local
dealer.
Wipe clean using a soft, dry cloth.
•
To remove stubborn dirt, moisten a cloth in warm water no hotter than
•
104°F , wring thoroughly, and then wipe.
The air intake grille can be removed in order to wash it with water.
•
Air clean filter
(STK-F4B)
KHS1852
Air clean filter
(STK-ARF4B)
KHS0951/KHS1251
25