Samsung SWL-4000AP Series User Manual page 87

Local Configuration
Remote Configuration
Firmware Upgrade
Automatic Searching AP
SNMP Compliance
IP Sharing
IP Auto-configuration
Wireless Bridging
Filtering
Access Control
Max. Associations
Radio
Receiver Sensitivity
Cell Coverage*
Output Power
* Cell Coverage may vary depending upon RF environment. * Cell Coverage may vary depending upon RF environment.
* Cell Coverage may vary depending upon RF environment. * Cell Coverage may vary depending upon RF environment.
Management Features
Serial EIA-232
- HTTP, Telnet, SNMP supported
- AP Manager for Microsoft Windows 95/98/2000/NT
Upgrading via Serial/Ethernet Interface supported
Easy to search the AP using AP Manager without
knowing AP's IP Address
MIB I, II and 802.11 MIB
- Supports NAT (Network Address Translation)
- All stations can share single IP address
Supports DHCP Server/Client features
Other Supported Features
Extends wireless networking using wireless bridging
Ethernet Frame Type Filtering
Ethernet Address Filtering
Limits the maximum number of stations for
load-balancing
Radio Data
- 2.4 GHz ISM band (2.400-2.4835 GHz)
- 11 Channels (US, Canada)
- 13 Channels (ETSI, Korea)
- 14 Channels (JAPAN)
-84dBm at 11Mbps
- Up to 150m(500ft) in Open Space
- Up to 30m(100ft) in Office Environment
Typical. 17dBm(70mW)
83