Table of Contents
Advertisement
④ TCP/IP address environment is set on [Basic] Dialogue Box.
Specify an IP address
After consulting with your system administrator, you enter IP Address,
Subnet Mask and Gateway Address.
Obtain an IP address automatically
This setting is possible when AP is used for DHCP Client.
⑤ Set ESSID and Channel number. Description is a parameter not related with
any operation, and it is used only to record description or stored location of AP.
We recommend you use different ESSID and Channel for each slots
Set ESSID for AP use.
ESSID (Max. 32 Characters) must consist of alphabetic and numeric
characters excluding blank and special characters(Capital Small letter
distinction).
6
Advertisement
Table of Contents
