Samsung SWL-4000AP Series User Manual page 68

⑥ If all the steps above are executed correctly, then the following menu will be
displayed on the HyperTerminal window. The default password is "public", and
user can change password later.
==================================================
==================================================
To configure the Access Point, the password is required.
Enter password :
⑦ When the password is entered, the following [ROOT] menu appears on the
HyperTerminal window.
==================================================
==================================================
[ ROOT ]
1. Basic
2. Advanced
3. Server
4. Status
5. Load default values
6. Save and reboot
CMD(t, p, h):
⑧ When AP setting procedure is completed, close HyperTerminal window. If this
is your first installation, on closing the HyperTerminal, you will get the
message "Do you want to save session AP Manager?". Then, click [yes]
button to save HyperTerminal setting.
Samsung SWL-4000AP Configuration
Samsung SWL-4000AP Configuration
64
[Menu]
[Menu]
[Menu]
[Menu]
t: Top Menu([ROOT])
p: Previous Menu
h: Help