Installation - Zanussi ZGG65414XA User Manual

If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a solu-
tion to the problem yourself, speak your dealer
or the local Service Force Centre.
If you operated the appliance incorrectly,
or the installation was not carried out by a
registered engineer, the visit from the custom-
er service technician or dealer may not take
place free of charge, even during the warranty
period.
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
A
MOD.
PROD.NO.
SER.NO
DATA
MODEL
A) Stick it on Guarantee Card and send this
part (if applicable)
B) Stick it on Guarantee Card and keep this
part (if applicable)

Installation

Warning! Refer to the Safety chapters.
Warning! The following instructions
about installation, maintenance and
ventilation must be carried out by qualified
personnel in compliance with the regulation in
force (UNI-CIG 7129 - 7131). Make sure that
the kitchen is well ventilated: keep natural
ventilation holes open (at least 100 cm²) or
install a mechanical extractor hood.
www.zanussi.com
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and ap-
proved spare parts shops.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
0049 SER.NO.
C) Stick it on instruction booklet
Gas Connection
Choose fixed connections or use a flexible
pipe in stainless steel in compliance with the
regulation in force. If you use flexible metallic
pipes, be careful they do not come in touch
with mobile parts or they are not squeezed. Al-
so be careful when the hob is put together
with an oven.
TYPE
230V-50Hz
IP20
23