Troubleshooting - Zanussi ZGG65414XA User Manual

Troubleshooting

Problem
There is no spark when lighting
the gas
The flame is blow out immediately
after ignition
The gas ring burns unevenly
22
Possible cause
• There is no electrical supply
• Burner cap and crown are
placed uneven
• Thermocouple is not heated
sufficient
• Burner crown is blocked with
food residues
Remedy
• Make sure that the unit is con-
nected and the electrical sup-
ply is switched on.
• Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
• Make sure that the burner cap
and crown are in correct posi-
tions.
• After lightning the flame, keep
the knob pushed for equal or
less than 10 seconds.
• Make sure that the injector is
not blocked and the burner
crown is clear of food particles.
www.zanussi.com