Zanussi ZGG65414XA User Manual
Hob
Hide thumbs
Also See for ZGG65414XA:
- User manual (16 pages) ,
- User manual (68 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZGG65414XA
Summary of Contents for Zanussi ZGG65414XA
- Page 1 User manual ZGG65414XA...
-
Page 2: Table Of Contents
• Cleaning and user maintenance shall not be made by children without supervision. General Safety • The appliance and its accessible parts become hot during use. Do not touch the heating elements. • Do not operate the appliance by means of an external timer or separate remote-control system. www.zanussi.com... -
Page 3: Safety Instructions
The isola- tion device must have a contact opening width of minimum 3 mm. www.zanussi.com... - Page 4 • Clean the appliance with a moist soft cloth. • Used oil, that can contain food remnants, can Only use neutral detergents. Do not use cause fire at a lower temperature than oil abrasive products, abrasive cleaning pads, used for the first time. solvents or metal objects. www.zanussi.com...
-
Page 5: Product Description
3. Adjust the flame after it is regular. Always light the burner before you put cookware. If after some tries the burner does not light, check if the crown and its cap are in To light the burner: correct positions. www.zanussi.com... -
Page 6: Helpful Hints And Tips
Auxiliary 80 - 180 mm Do not put unstable or damaged pots on the Warning! Make sure that the bottoms of rings to prevent from spill and injury. pots do not stand above the control www.zanussi.com... -
Page 7: Care And Cleaning
• When you wash the pan supports by hand, some detergent. take care when you dry them as the enamel- 3. At the end rub the appliance dry with a ling process occasionally leaves rough clean cloth. edges. If necessary, remove stubborn stains using a paste cleaner. www.zanussi.com... -
Page 8: Troubleshooting
5 seconds. The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com... -
Page 9: Installation
Also be CIG 7129 - 7131). Make sure that the kitchen careful when the hob is put together with an is well ventilated: keep natural ventilation holes oven. open (at least 100 cm²) or install a mechanical extractor hood. www.zanussi.com... - Page 10 It has to be supplied with a correct plug are necessary for the type of gas you use which can hold the load that the rating plate (see table in "Technical Information" chap- ter). www.zanussi.com...
- Page 11 2 cm longer than the brown (or black) phase wire. min 20 mm Building In 60 mm (max 150 mm) min. 100 mm min. 650 mm min. 55 mm a) Removable panel 30 mm b) Space for connections 560 mm www.zanussi.com...
-
Page 12: Technical Information
G31 (3+) 37 mbar = 557 g/h Electric supply: 230 V ~ 50 Hz Category: II2H3+ Gas Connection: G 1/2 Gas supply: G20 (2H) 20 mbar Appliance class: By-pass diameters Burner Ø By-pass in 1/100 Burner Ø By-pass in 1/100 Auxiliary Rapid Semi-rapid Gas burners www.zanussi.com... -
Page 13: Environment Concerns
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com... - Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...