Samsung SyncMaster 403Tn Owner's Manual page 53

Image Lock Image Lock is used to fine-tune and get the best image by
removing noise that creates unstable images with jitter and
shimmer. If satisfactory results are not obtained using the
Fine adjustment, use the Coarse adjustment and then use
Fine again.
1) Coarse
: Removes noise such as vertical stripes. Coarse adjustment
may move the screen image area. You may relocate it to the
center using the Horizontal Control menu.
2) Fine
: Removes noise such as horizontal stripes. If the noise
persists even after Fine tuning, repeat it after adjusting the
frequency (clock speed).
3) Position
: Adjusts the screen location horizontally and vertically.
The values of Fine, Coarse, position are adjusted
Auto
Adjustment automatically.
If you change resolution in the control panel, Auto function
will be executed.
- The direct button on the remote control is 'AUTO'
button.
Signal Used to make up for the weak RGB signal which has been
Balance transmitted by a long signal cable.
1) Signal Balance
2) Signal Control
You can switch the Size.
Size
• Wide
• 4:3
PIP Picture You can adjust the PIP Screen Settings.
1) Contrast
: Adjusts the Contrast of the PIP window on the screen.
2) Brightness
: Adjusts the Brightness of the PIP window on the screen.
3) Sharpness
: Adjusts the difference between the lightest and darkest
areas of the PIP window.
4) Color
: Adjusts the Color of the PIP window on the screen.
5) Tint
: Adds a natural tone to the PIP window.
Available Mode : PIP
AV / S-Video / Component Mode
1) Coarse
/ Fine
3) Position
1) Signal Balance
2) Signal Control