Samsung SyncMaster 403Tn Owner's Manual page 51

Video signal. (Off/On)
1) PIP
- The direct button on the remote control is 'PIP' button.
• Off/On
: Turn the PIP Screen on or off.
2) Source
- The direct button on the remote control is 'SOURCE'
button.
• PC / DVI
: AV / S-Video / Component Mode
• BNC
: AV / S-Video Mode
• AV / S-Video
: PC / BNC / DVI Mode
• Component
: PC / DVI Mode
: Select the input source for the PIP.
3) Swap
- The direct button on the remote control is 'SWAP' button.
: Swapping the contents of the PIP and main image.
The image in the PIP window will appear on the main
screen, and the main screen image will appear in the PIP
window.
4) Size
- The direct button on the remote control is 'SIZE' button.
: Change the Size of the PIP window.
If you select
will not be activated.
5) Position
: Change the Position of the PIP window.
6) Transparency
• High / Medium / Low / Opaque
: Adjust the Transparency of PIP windows.
Available Mode : PIP
Edit Name Name the input device connected to the input jacks to make
your input source selection easier.
• PC
• BNC
• DVI
• AV
• S-Video
• Component
Picture
PC / BNC /DVI Mode
More than one PIP couldn't be overlapped on
screen as BNC and the component use the same
terminal.
, , in Size, Position and Transparency
MagicNet couldn't be renamed.
1) PIP
2) Source
3) Swap
4) Size
5) Position
6) Transparency