Samsung SyncMaster 403Tn Owner's Manual page 15

7. MENU
Use this button to open the on-screen menu and exit from the menu screen or close screen
adjustment menu.
8. ENTER
Activate a highlighted menu item.
9. PRE-CH
This button is used to return to the immediately previous channel.
- This fuctions does not work for this monitor.
10. CH/PAGE
Selects channels or page.
- This fuctions does not work for this monitor.
11. SOURCE
Push the button, selects the Video source changes.
12. INFO
Current picture information displays on the upper left corner of the screen.
13. EXIT
Exits from the menu screen.
14. Up-Down , Left-Right buttons
Moves from one menu item to another horizontally, vertically or adjusts selected menu values.
15. P.MODE (M/B)
When you press this button, current picture mode is displayed on the lower center of the screen.
AV / S-Video / Component : P.MODE
The Monitor has four automatic picture settings that are preset at the factory.
Then push button again to circle through available preconfigured modes.
( Dynamic Standard
PC/DVI/BNC : M/B (MagicBright™)
MagicBright™ is a new feature providing the optimum viewing environment depending on the
contents of the image you are watching.
Then push button again to circle through available preconfigured modes.
(Entertain Internet
16. STILL
When you press this button, STILL is displayed on the lower center of the screen.
Press the button once to freeze the screen.
Press it again to unfreeze.
17. BBE
Recreates the natural sound and improves sound clarity through boosting high and low range
frequencies. As a result high sounds are clearer, brilliant and finely detailed while low sounds are
tight, well-defined and harmonically rich.
18. MTS
You can select the MTS (Multichannel Television Stereo) mode.
FM Stereo
- This fuctions does not work for this monitor.
19. PIP
Every time you push the button, activate a PIP screen.
20. SOURCE
The PIP window's signal source changes.
Movie Custom )
Text Custom )
Audio Type MTS/S_Mode
Mono
Stereo Mono
SAP Mono
Mono
Manual Change
Stereo
SAP
Default
Mono