Samsung SyncMaster 403Tn Owner's Manual page 29

1. Connect the power cord for your monitor to the power port on the back of the monitor.
Trun on power switch.
2. There are 3 ways to connect the signal cable to your monitor.
Choose one of the followings :
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15 pin D-sub Port on the back of your monitor.
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI Cable(DVI-D + DVI-D) to the DVI Port on the back of your Monitor.
2-3. Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V port on the back of your
Monitor and the 15 pin D-sub Port on the computer.
DVI cable or BNC cable is optional.
3. Connect the audio cable for your monitor to the audio port on the back of your computer.
4. Turn on both your computer and the monitor.
Contact a local Samsung Electronics
2. Connecting to a VCR
service center to buy optional items.