Wells WDDI-31 Installation And Operating Instructions Manual page 4

SAFETY SYMBOLS
These symbols are intended to alert the user to the
presence of important operating and maintenance
instructions in the manual accompanying the appliance.
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
This unit has been tested for proper operation before leaving our plant to ensure delivery
of your unit in perfect condition. However, there are instances in which the unit may be
damaged in transit. In the event you discover any type of damage to your product upon
receipt, you must immediately contact the transportation company who delivered the
item to you and initiate your claim with that company. If this procedure is not followed,
it may affect the warranty status of the unit. If damage or loss is not apparent until after
equipment is unpacked, a request for inspection of concealed damage must be made
with carrier within 15 days. Please record the model number, serial number, voltage, and
purchase date in the area below at the time of receipt.
Model Number
Serial Number
Voltage
Purchase Date
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please
have the information in the above fields ready when you call to ensure a faster service.
Using any part other than genuine Wells factory supplied parts relieves the manufacturer
of all liability. Due to periodic changes in designs, methods, procedures, policies, and
regulations, the specific actions contained in this document are subject to change without
notice. Wells reserves the right to change product specific actions and design without
notice. In regards to previously purchased equipment, such revisions do not entitle the
buyer to corresponding changes, improvements, additions or replacements. While Wells
Manufacturing exercises good faith efforts to provide information that is accurate, we are
not responsible for errors or omissions in information provided or conclusions reached as
a result of using the specifications. By using the information provided, the user assumes
all risks in connection with such use. When performing maintenance, power to the unit
should be unplugged or turned off.
PLEASE REFER TO THE WARRANTY PAGE FOR SPECIFIC WARRANTY INFORMATION.
AUTHORIZED SERVICE AGENT LISTING
Reference the listing provided with the unit or for an updated listing go to the website
or call customer service to find an agent.
Business hours: 8:00 a.m. to 4:30 p.m. Central Standard Time
Telephone: 800-264-7827
Email: customerservice@star-mfg.com
Website: www.wells-mfg.com
4
ii