Other Settings
You can use the settings in this section to adjust the
tuning and touch of the keyboard, to configure pedal
and MIDI settings, and to configure other parameters
in order to tailor Digital Piano operation to your
particular needs.
Configuring Settings
1.
Press the
(FUNCTION) button.
The FUNCTION lamp will light and the function screen
will appear on the display. (See table below.)
Parameter or group
2.
Use the
(u) and
one of the parameters (1 through 8) shown in
the table below.
• Parameters 4 through 8 actually are parameter
groups. After selecting a group, press the
(ENTER) button, and then use buttons
(i) to select the parameter you want.
• Short cut buttons also are available for accessing a
parameter directly after you press the
(FUNCTION) button, without going through the
menu. See the "Shortcut Button" column in the table
below for the applicable shortcut button of each
parameter.
3.
(w, q) buttons to change the
Use the
setting of the currently selected parameter.
• To return to the function screen, press the
or
(FUNCTION) button.
E-40
Setting
(i) buttons to select
(u) and
(EXIT)
NOTE
• Holding down the
you press the
scroll the setting in steps of 10.
• You also can use the
faster scrolling while changing the tone number,
rhythm number, and other scrollable settings.
• Keep the
while pressing a
speed scrolling. Releasing the
button first can result in another unintended
setting being changed.
btw, q
bsFUNCTION
ctu
(FUNCTION) button while
(w, q) buttons in step 3 will
(FUNCTION) button for
(FUNCTION) button depressed
(w, q) button for high-
(FUNCTION)
dki