Table of Contents
Advertisement
Using Built-in Tones
Using Octave Shift
After you split the keyboard (page E-11), you may find
out that the lower range notes on the left are too low or
that the upper range notes on the right are too high.
You can use octave shift to shift the octaves of the
upper range and lower range upwards or downwards
in octave units.
1.
While holding down the
button, press the
This displays the octave shift screen.
Currently selected range
2.
Use the
(PART) button to select the range
whose octave you want to change.
• Each press of
(PART) cycles through the ranges
below.
U1 (Upper1): Main tone
U2 (Upper2): Layered tone
L1 (Lower1): Left (lower range) tone
3.
(w, q) buttons to shift the
Use the
octave of the currently selected range.
• You can shift the octave within the range of –2 to 0 to
2.
4.
Press the
(FUNCTION) button.
This exits the octave shift screen.
NOTE
• Octave shift also can be performed as described for
"Octave Shift" (page E-41).
E-12
(FUNCTION)
(TONE) button.
Shift amount
Adjusting the Brilliance of a
Tone
1.
Press the
(FUNCTION) button.
The FUNCTION lamp will light and the function screen
will appear on the display.
Lit
2.
Use the
(i) and
the Tmpr/Effect screen.
3.
Press the
(ENTER) button.
This will display a screen for selecting settings in the
Tmpr/Effect group.
4.
Use the
(i) or
the brilliance screen shown below.
5.
(w, q) buttons to adjust the
Use the
brilliance of the currently selected tone. You
can adjust brilliance in the range of –3 to 0 to 3.
w : Mellower and softer
q : Brighter and harder
6.
Press the
(FUNCTION) button.
This will exit the brilliance screen and cause the
FUNCTION lamp to go out.
NOTE
• See "Other Settings" (page E-40) for details about
using the
(FUNCTION) button.
(u) buttons to select
(u) button to select
Advertisement
Table of Contents
