Shop-Vac 610 Series User Manual page 7

5. Go back and tighten machine screws at bottom of uprights and braces.
6. Attach caster sockets (open end down) to front of main frame using 5/8 inch long machine screws, lock
washers and nuts. Insert casters into sockets.
7. Slide basket adapters on handle. See images below for correct installation of adapters.
For 14" diameter tanks
Handle
8. Attach handle onto uprights by pushing down and holding buttons in on uprights.
9. Place tank retaining bracket through slot and bolt in rear frame and screw on knob.
10. Slide bumper down over main dolly frame until it bottoms out.
11. Place axle upright on a hard surface and hammer on (1) cap nut. Place (1) wheel on axle and slide
down to cap nut. Slide axle through rear of frame and slide on other wheel. Before assembling cap nut
on other end of axle, be certain dolly is assembled correctly. (You may place tank on dolly and tighten
knob of retaining bracket to be sure of correct assembly.)
12. After ensuring dolly is assembled correctly remove tank and place dolly on side with installed cap nut
on hard surface and hammer second cap nut on axle.
13. Place accessory basket on adapters and pull out on outer rim of basket and
snap into place.
5
6
23
2
15
14
16
5
19
17
15
BAND DOLLY
1. Place casters into sockets on band assembly.
2. Place tank upside down and slip band assembly over lip on bottom of tank.
3. Insert bolt and tighten nut until secure.
4
ASSEMBLY (CONT'D)
Handle
1
4
23
3
15
7
11
10
13
12
5
9
21
15
8
18
1
2
3
ITEM NUMBER & DESCRIPTION
1. Handle
22
2. Handle upright
3. Handle brace
4. ¼ - 20 x 1¼" Hex head
machine screw (Black)
5. ¼" External tooth
lockwasher
6. ¼ - 20 Hex nut (Black)
7. Rear dolly frame
8. Main dolly frame
5
9. / - 18 x 2½" Hex head bolt
16
20
10. 5 / " Split lockwash
16
11. 5 / - 18 Hex nut
16
ITEM NUMBER & DESCRIPTION
1. 55 Gal. band assembly
2. Caster
For 16" diameter tanks
Tank
Handle
Basket
Basket
Adapter
Pull Outward
on Basket
12. Tank retainer bracket
13. Threaded knob
14. Axle
15. ¼ - 20 x
16. ¼ - 20 Hex nut
17. Caster socket
18. Caster
19. Bumper
20. 10" Wheel (25.4cm)
21. Cap nut
22. Accessory basket
23. Basket adapter
3. Hex head bolt, ¼ - 20 x 1¾
4. Hex nut, ¼ - 20
Handle
Basket
Adapter
5
/ " Hex head
8
machine screw
PAGE 7