Advertisement
62" Lateral Return • ONRTLF6224 • INSTRUCTIONS
STEP 1 : Pull out each drawer and find the black tabs at the end of the suspension. Lift one side up and press the other side down
simultaneously and pull the drawer out. This will unlock the drawer and release it. Repeat this for all drawers.
STEP 2A : Insert 2 Glides(G) into each Foot Bracket(PED-J).
G
STEP 2B : Attach each Foot Bracket(PED-J) to the Lateral(PED-I) by placing 1 Washer(H) between the base and each wood
screw hole on the Foot Brackets(Figure 2). Then, insert 6 Long Bolts(K) and 6 Wood Screws(I) to attach to Lateral(PED-I).
I
K
I
K
PED-J
I
K
STEP 3 : Lateral Component is Reversible. Decide on an orientation(Left and Right). According to the orientation that you choose,
remove 2 Cam Pin Covers in the location shown below. Then insert a Fine threaded Cam Pin(O) into each of the revealed inserts.
Left Return
CARTONS: TT6224, MP2412, PLF3624
PED-J
I
K
PED-I
I
K
I
K
Any problems or questions call Regency Office Furniture at 1-866-816-9822
G
Figure 2
K
PED-J
O
O
O
O
K
K
I
I
H
H
Right Return
62" Lateral Return
Page 3
I
H
Advertisement
