Regency TVCTRC12048 Instructions

Organize your parts and
hardware.
Hardware Components should include:
A) 12 Threaded Cams B) 12 Large Bolts
C) 1 Assembly Key D) 2 Medium Bolts (Type A)
E) 2 Medium Bolts (Type B) F) 8 Lag Bolts
G) 16 Small Bolts
Wooden parts include:
H) 2 Side Legs I) 1 Center Leg
J) 2 Table Top Halves
K) 2 Side Stringers (Type A)
L) 2 Side Stringers (Type B)
M) 1 Center Stringer (Type A)
N) 1 Center Stringer (Type B)
J
E
D
G
Step 1: Connect two Table Top Halves
(J) together. Align pins. Close Latch to
hold halves together.
J
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware, parts and packaging out of reach of children.
TVCTRC12048 | TVCTRC9648 - INSTRUCTIONS
IMPORTANT: You may want to
F
position all parts before attaching
B
with bolts to ensure that assembly
will be completed correctly. All Type
A Stringers should be on the same
side of the table; likewise, the same is
true for Type B Stringers. The Type B
Stringers, when attached should cover
the Bolts used to secure the Type A
Stringers.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
A
C D
F
L K K L
Step 2: Insert Threaded Cams (A) into
holes. Holes are located on sides of Side
and Center Stringers. Turn so that the
longer line on the Cam is horizontal.
B
E
G
M
H
H I
N
I
A