Table of Contents
Advertisement
08-A288-Voice/Tones
2/8/01
10:59 AM
T o n e s
: to delete notes.
: to move a note to the next semitone
higher position or lower position in the
musical scale. For example, the note A
moves A#, B, C, C# in the scale each time
you press
.
: to adjust a length of a note. Enter a note,
then press
. Notice that the note length
changes each time you press the key.
You can listen to your melody by pressing the Listen
soft key. If you are satisfied, press the Yes soft key,
and enter the melody name. For information on how
to enter a name, refer to page 41.
N o t e: If you want to cancel your composing, pre s s
. The display goes back to the pre v i o u s
menu level, the screen displaying E m p t y.
After you save the melody, the display asks you if
you want to set the melody as the ring tone. If you
select Yes, your phone plays the melody each time
your phone rings. If you select No, the melody is just
saved and the phone returns to the idle mode.
To Delete a Selected Melody
1. Select the melody you want to delete.
2. Press and hold
for a few seconds. All notes
will be erased.
3. Press the Listen soft key. The display asks you if
you are sure you want to erase the melody. Select
the Yes soft key.
92
Page 92
Ring Volume
Allows you to adjust the ringing volume to one of
seven levels. Use the volume keys on the left side of
the phone or the
number of bars, the greater the volume level.
Alert Type
Allows you to indicate how you are to be informed of
any incoming calls. The following options are
a v a i l a b l e .
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via menu option 4-1.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
N o t e : P ressing and holding down
between the current alert type and Vi b r a t i o n.
T o n e s
Menu 4-3
or
keys. The greater the
Menu 4-4
toggles
93
Advertisement
Table of Contents
