Sound Settings; Ring Tone (Menu 3.1); Ring Volume (Menu 3.2); Alert Type (Menu 3.3) - Samsung SGH-x426 User Manual

Sound Settings

Sound settings allow you to customize the following:
♦
ring melody, volume, and type.
♦
sounds made when you press a key, receive a message, open/
close the phone, or switch your phone on/off.
♦
alert tone made every minute during a call, when you make an
error, or when your call is connects to the telephone network.
Note:
When the phone is in Silent mode, you cannot change sound settings.
Ring Tone
(Menu 3.1)
This menu allows you to select a ring melody.
You can choose between several melodies. Each
time you select a melody, it plays for a few seconds.
If you have downloaded sounds from the Internet,
you can also select them in this menu.
Ring Volume
This menu allows you to adjust the ring volume. Use
the Up and Down keys or the Volume keys on the left
side of the phone to increase or decrease the
volume.
Alert Type
(Menu 3.3)
This menu specifies how you are to be informed of
incoming calls.
The following options are available:
Light Only: the service light flashes, but the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu (Menu 3.1).
Vibration: the phone vibrates but does not ring.
Sound Settings
72
(Menu 3.2)