DEPTH
The depth gage indicates the amount of wood being
removed
tioned under the depth gage on the front of the planer.
Your planer has a replane feature using preset markers
for
plane material at a set measurement of 1/4 in. (68mm).
The maximum depth of the replane indicator is 1-3/4 in.
(44
IR
IP
IL
IL
IM
1
t
AVOIDING
Snipes,
by
erly supported. Engaging the cutter lock before planing
will
noticeable,
and flat with the planer table to minimize snipe. Butting
workpieces
will
because it provides a more stable feed.
For
Little
workpiece.
the desired thickness. Otherwise, plane the top flat first,
turn the workpiece and plane the bottom half.
For
0
1-3/4
1-1/2
Never
I1
I1
D
(
c
must
tional
ported
weight to work against keeping the stock flat.
To
end
best
middle and plane the pieces separately. This method
eliminates
workpieces.
The
cupped
Page 14
O
D