Stopping Printing Or Cutting Operations; Pausing Printing Or Cutting Operations - Roland SC-545EX Print&Cut User Manual

4-7 Stopping Printing or Cutting Operations

Stopping Printing or Cutting Operations
Stopping Printing or Cutting
Press the [PAUSE] key.
1
Halt transmission of printing instructions from
2
the computer.
Hold down the [SETUP] key for one second or
3
longer. Any remaining data is cleared.

Pausing Printing or Cutting Operations

Press the [PAUSE] key. The PAUSE LED lights up.
To resume printing
Press the [PAUSE] key again. The PAUSE LED goes out.
Chapter 4: A Wide Variety of Operations
80
The PAUSE LED lights up
The SETUP LED flashes
The PAUSE LED lights up
The PAUSE LED goes out