Changing The Way In Which Audio Cd Volume Is Adjusted - Roland DiscLab CDX-1 Owner's Manual

How to play an audio CD—the CD Player
Changing the way in which audio CD
volume is adjusted
At the factory settings, the audio CD volume is set to be adjusted by the AUDIO CD
fader (AUDIO TRACK 7-8 fader) and the MASTER fader. If you wish to adjust the
volume of audio CDs by using only the MASTER fader (without using the AUDIO
CD fader), use the following procedure to change the setting.
1. Press [UTILITY].
The Menu are displayed as icon.
fig.2-06
2. Press CURSOR [
icon.
3. Press [YES/ENTER].
The System settings screen appears.
fig.2-07
4. Press CURSOR [
"Audio CD Fader."
5. Turn the TIME/VALUE dial to select "OFF."
Audio CD Fader:
This turns the audio CD fader on/off for when an audio CD is played.
ON: The audio CD fader (AUDIO TRACK 7-8 fader) and Master fader will be used.
OFF: The volume will be adjusted only by the MASTER fader.
6. Press [DISPLAY] to return to the Basic screen.
52
] to select the System
] to move the cursor to
If you wish to play the pads
while listening to an audio CD
(p. 69), it is convenient to make
settings so that the AUDIO CD
fader (AUDIO TRACK 7-8
fader) adjusts the volume,
since this will allow you to
adjust the pad volume and
audio CD volume separately.