Boosting The Sample Level As High As Possible-Normalize - Roland DiscLab CDX-1 Owner's Manual

Boosting the sample level as high as
possible—Normalize
Normalize is a function that raises the level of the entire sample as high as possible
without exceeding the maximum level.
1. Press PAD RECORDING [TEMPO MATCH] twice.
Alternatively, press [TEMPO MATCH] and then press CURSOR [
fig.31-03
The Pad Edit menu are displayed as icons.
fig.33-13
2. Press CURSOR [
Normalize icon.
3. Press [YES/ENTER].
fig.33-14
The Normalize Settings screen appears.
4. Use CURSOR [
and "To" (destination) pad bank number and pad number, and specify the
sample for each.
Specify the pad bank number by turning the TIME/VALUE dial. Specify the pad
number by pressing a pad or by turning the TIME/VALUE dial.
5. Press [YES/ENTER].
The Normalize operation is executed.
* If the destination pad already contains a sample, the "Overwrite?" message appears. If it is OK to
overwrite the existing sample, press [YES/ENTER]. If you do not wish to overwrite the existing
sample, press [NO/EXIT].
6. Press [DISPLAY] to return to the Basic screen.
] to select the
] [ ] [ ] [ ] to select the "Source" (source sample)
Editing the sample of a pad
].
87