Confirming The Completion Of The Installation; Other Information - Sony SU-WL855 Installation Information

Confirming the Completion of
the Installation
Check the following points.
 The cord and the cable are not twisted or
pinched.
WARNING
 Improper placement of the AC power cord, etc. may
cause fire or electric shock through a short circuit. Be
sure to confirm the completion of the installation for
safety.

Other Information

When removing the TV or LCD Display, reverse
the previous installation procedure.
WARNING
 Two or more persons (three or more persons for
189.3 cm (75 inches) and above TV or LCD Display) are
needed to transport a large TV or LCD Display.
 Attaching the Wall-Mount
Bracket to the Solid Concrete or
Concrete Block
WM1
Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV or LCD Display and is capable of
supporting a weight of at least six times
that of the TV or LCD Display.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
20.
• Refer to your TV's or LCD Display's
Reference Guide for the TV's or LCD
Display's weight.
Note
 When your TV or LCD Display is installed on the
wall, the upper side of the TV or LCD Display
slightly leans forward.
 We recommend you to check the position of TV or
LCD Display in the viewing environment.
2
Align
WM1
four marks.
× 4
Note
 Use a level to check whether
− 13 (US) −
to the wall and make
WM1
WM1
is level.
US