Sony SU-WL855 Installation Information page 14

3
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least six times that of the TV or
LCD Display.
Note
 Pilot holes must be drilled to a depth of 75 mm
(3 inch), using a 10 mm (13/32 inch) diameter drill
bit.
4
5
Install on the wall.
WM1
Note
 Use a level to check whether
Precaution
 Do not over-tighten the lag bolts
tightening could reduce the holding power of the
WS2
lag bolts .
× 4
10 mm
(13/32 inch)
75 mm
(3 inch)
WA1
WM1
WW1
WS2
WM1
is level.
WS2
. Improper
− 14 (US) −
6
Pull out the arm of the bracket to
the end.
Preparing for the Installation
of the TV or LCD Display
Note
 Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.
1
Attach the Table-Top Stand to
make the TV or LCD Display
standing.
• Refer to your TV's or LCD Display's Setup
Guide.
2
Remove the terminal covers.