Using The Self-Timer - Ricoh Caplio R7 User Manual

t Using the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.
1
Switch the mode selector to 5.
2
Press the t (Self-timer)
button.
• The Self-timer symbol appears on
the screen.
• The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera
shoots after 10 seconds.
• Each press of the t (Self-timer) button changes the self-timer
setting in the following order: 10 sec, 2 sec, and Self-timer Off.
3
Press the shutter release button.
• The focus is locked, and the AF auxiliary light/self-timer lamp
lights for 8 seconds when the self-timer starts and then blinks for
the final 2 seconds.
Note ---------------------------------------------------------------------------------------------------
• The camera remains in self-timer mode even after the image is shot. To cancel the
self-timer, press the t (Self-timer) button and change the self-timer setting to [Self-
Timer Off].
• When the AF auxiliary light/self-timer is set to 2 seconds, the self-timer lamp does
not light or blink.
45