Correcting the Image Brightness and
Contrast (Correct Contrast)
You can correct the brightness and contrast of a shot still image and
record the still image.
1
Press the 6 (Playback) button.
2
Press the !"#$ buttons to display the file with the
brightness you want to correct.
3
Press the MENU/OK button.
• The Playback menu appears.
4
Press the " button to select
[Correct Contrast] and press
the $ button.
• The correct contrast bar and
histogram appear in the image.
• If you selected a file that cannot be
used with this function, an error
message is displayed, and then the
Playback menu appears.
5
Press the !" buttons to
correct the brightness.
• Press the ! button to increase the
brightness of the image, or press the
" button to decrease the brightness
of the image.
• You can set the brightness to any of
five levels.
• To cancel brightness correction,
press the DISP. button.
6
Press the MENU/OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The image before correction is also
recorded.
Correct Contrast
Cancel
Ok
3
109